Pipe Cutting & Beveling Machine CPC-B

Available in Hydraulic and Pneumatic options, the machines will cut and bevel most machinable materials, including carbon steel, stainless steel, ductile iron, cast iron, and most other alloys without spark or flameThe heavy duty chain tensioning mechanism, encased in a high strength alloy frame provides the necessary rigidity and strength for cutting the pipe at the highest travel speed possible.

The frame of the machine has six wheel posi-tions to better follow the radius of the pipe and allow the radius of the pipe and allow tracking accuracy on a 36″ pipe of better than 0,3 mm. The machine is equipped with a two speed drive gearbox, which provides positive movement of the machine around the pipe in all kinds of pipe cutting conditions. No out-of-round com-pensation is needed as the machine follows the pipe’s outside diameter.

The hydraulic driven pipe cutting and beveling machine is designed for cutting heavy wall, high alloy pipes or particularly tough steel applications. The closed loop hydraulic system ensures proper lubrication is applied to the drive motors, which extends the life of the machine. The dual hydraulic motors are infinitelyadjustable and deliver consistent horsepower to the cutting blades and drive motors. Two hydraulic motors drive the machine. The 4 KW hydraulic motor coupled to the heavy duty transmission rotates the cutting blades up to 76 RPM. The 1 KW motor connected to the two speed transmission moves the machine around the pipe. Due to the extreme performance of the machine, the hydraulic version must be used with a Power Pack capable of delivering 50 ltr/min at 100 bar pressure in order to achie-ve maximum results. To cut very thick walled pipes multiple passes may be required. In order to maintain the same degree of accuracy a guide chain must be used in these situations. For pipe OD > 36“ (914 mm) it is also recommended for high return accuracy and for OD > 48“ (1219 mm) it is generally recommended. These can be supplied as stan-dard up to 63″ (1600 mm). For larger pipes sui-table chain kits can be purchased.

The hydraulic driven pipe cutting and beveling machine is designed for cutting heavy wall, high alloy pipes or particularly tough steel applications. The closed loop hydraulic system ensures proper lubrication is applied to the drive motors, which extends the life of the machine. The dual hydraulic motors are infinitelyadjustable and deliver consistent horsepower to the cutting blades and drive motors. Two hydraulic motors drive the machine. The 4 KW hydraulic motor coupled to the heavy duty transmission rotates the cutting blades up to 76 RPM. The 1 KW motor connected to the two speed transmission moves the machine around the pipe. Due to the extreme performance of the machine, the hydraulic version must be used with a Power Pack capable of delivering 50 ltr/min at 100 bar pressure in order to achie-ve maximum results. To cut very thick walled pipes multiple passes may be required. In order to maintain the same degree of accuracy a guide chain must be used in these situations. For pipe OD > 36“ (914 mm) it is also recommended for high return accuracy and for OD > 48“ (1219 mm) it is generally recommended. These can be supplied as stan-dard up to 63″ (1600 mm). For larger pipes sui-table chain kits can be purchased.